1 / 5
Carbonated Drink Filling Machine | JNDTECH 3-in-1 3000-15000 BPH
JNDTECH carbonated drink filling machine (isobaric 3-in-1 monoblock) for PET cola, soda & sparkling water. 3000-15000 BPH, low CO₂ loss, accurate level. Get specs & quote.
| JND | 3000-15000BPH |
|---|---|
| FOB Pirce | 80000USD |
Product Description
Carbonated Drink Filling Machine for PET Bottles (3-in-1 Monoblock)
The JNDTECH carbonated drink filling machine is an isobaric 3-in-1 monoblock (rinsing–filling–capping) engineered for PET-bottled soft drinks such as cola, soda water and sparkling water. Built on counter-pressure filling technology, it keeps CO₂ in the bottle and delivers stable, foam-free filling at 3000–15000BPH. A compact footprint and servo-driven capping make it the right choice for beverage factories scaling from pilot line to full production.
Key Features
- Isobaric (counter-pressure) filling — fills under equal pressure to prevent foaming and CO₂ loss, the core difference from still-water fillers.
- Low CO₂ loss — <0.5 g/L, protecting gas level and your cost per bottle.
- Accurate liquid level — ±2 mm level control for uniform appearance and less overfill.
- 3-in-1 monoblock — rinsing, filling and capping on one frame, fewer transfers, lower contamination risk.
- PET-friendly gripper — neck-holding transport protects bottle body and suits 200–2000 ml bottles.
- Servo capping — torque-controlled capping for tighten without damaging caps.
- Touch-screen PLC — recipe changeover, fault alarm and output count on one HMI.
- CIP-ready — built-in clean-in-place ports for hygienic changeovers between SKUs.
Technical Parameters
Capacity| Model | JND |
|---|---|
| Filling method | Isobaric (counter-pressure) |
| Bottle type | PET 200–2000 ml (round / square) |
| 3000-15000BPH (500 ml) | |
| CO₂ loss | <0.5 g/L |
| Filling accuracy | ±2 mm liquid level |
| Power | 4.5 kW |
| Dimensions | 2500 × 1800 × 2200 mm |
| Weight | ≈ 3200 kg |
How It Works — Isobaric Filling Machine
Empty PET bottles are gripped by the neck and rinsed, then enter the filling carousel where CO₂ is first charged into the bottle to match tank pressure. Beverage flows in under equal pressure with almost no foaming, the bottle is de-pressurized, and a servo capper seals it — keeping carbonation intact from tank to shelf.
Applications
- Carbonated soft drinks — cola, lemon-lime, orange soda
- Sparkling / soda water and flavored carbonated water
- Carbonated juice and energy drinks (low pulp)
- Small-batch craft soda and CSD pilot lines
Why Choose JNDTECH
Shenzhen JNDTECH has supplied beverage and water filling lines since 2008, serving 125+ countries. Every carbonated filling machine is built to order, FAT-tested before shipment, and backed by remote commissioning and spare-part support — so your line reaches rated BPH without a long ramp-up.
Related Products
- Complete Water & Beverage Bottling Plant (Turnkey Guide)
- PET Blow Molding Machine
- Pure / Mineral Water Filling Machine
- Request a quote & line layout
FAQ
Q1: What is the difference between a carbonated and a still-water filling machine?
A still-water filler uses gravity or low-pressure filling. A carbonated drink filling machine uses isobaric (counter-pressure) filling — it charges CO₂ into the bottle first to match tank pressure, so the drink fills without foaming and keeps its gas.
Q2: What drinks can it fill?
Cola, soda water, sparkling water, carbonated juice and low-pulp energy drinks. It is not for hot-filled or high-pulp products.
Q3: What equipment do I need alongside it?
A complete line adds a blow molder, a syrup preparation & carbonation mixer, a chiller / CO₂ system, an air compressor, a tunnel pasteurizer or warmer, and a labeller — we can size the whole line for you.
Q4: How much CO₂ is lost during filling?
With isobaric filling, CO₂ loss is below 0.5 g/L, far lower than open or gravity fillers, protecting both fizz and margin.
Q5: What production capacity can it reach?
The Jndtech 3000-15000 BPH at 500 ml. We supply larger monoblocks up to 20000+ BPH for full-scale plants.
